Robert Sorby Modular Micro Spiralling Tool- 370A

Robert Sorby Modular Micro Spiralling Tool- 370A creates spirals and textured patterns in soft and hardwood. It quickly creates barley twists, chequered patterns, hatchings, knurls, and rope effect designs, to name just some of the numerous shapes this tool's two-cutter combination is capable of. With a bit of practice, you'll be amazed at the results. The Micro Spiralling Tool is designed for…

Robert Sorby Steb Drive

The Robert Sorby Steb Drive is held securely in place by the jaws of a chuck while ensuring an suburb grip on any wood. It uses the same innovative head design as the original Stebcenter holding the wood securely with its ring of serrated teeth and spring-loaded center pin. When the Stebdrive is installed in your chuck, it eliminates the need to remove the chuck for turning between centers.…

Robert Sorby Stebcenter 2MT Drive Center

The Robert Sorby Stebcenter 2MT Drive Center is an invaluable accessory for every woodturner. Fitted in the lathe headstock, it is perfect for both novice and experienced turners. Its outer ring of sharp teeth ensures that the Stebcenter bites the wood to give it more security and drive without slipping or spinning on the surface. With uniform contact points, there is minimal risk of splitting…

Robert Sorby Revolving Stebcenter

The Robert Sorby Stebcenter is an invaluable accessory for every woodturner. Fitted in the lathe tailstock, it is a boon for both the novice and the experienced. Its ring of sharp teeth ensures that the Stebcentre bites the wood to give it more security and drive. There is minimal risk of splitting because there are several points of contact. The Stebcentre can be used equally confidently on…

Robert Sorby Standard Parting Tool

The Robert Sorby Standard Parting Tool is used to remove your finished project from the waste material, and the parallel sides make for a rigid tool that handles well. The 1/8″ (3mm) tool reduces the amount of waste, which is vital if using expensive wood. It also makes for a fine detailing tool, e.g., beads and fillets. this tool is made in Sheffield from the finest HSS available.

Robert Sorby Standard Bowl Gouge 1/4″ Tool Steel Only

Robert Sorby Standard Bowl Gouge 1/4" Tool Steel OnlyA must in the tool kit of every bowl turner. These tools are ideal for making bowls. They can produce either massive profiling cuts or delicate finishing cuts as necessary.

Robert Sorby Fingernail Bowl Gouge 1/4″ Tool Steel Only

Robert Sorby Fingernail Bowl Gouge 1/4" Tool Steel Only The fingernail shape of this gouge increases flexibility allowing the turner to perform 'pull cuts' without catching the lathe bed. The greater cutting area can be used equally well for heavy profiling cuts or fine, delicate shearing cuts. Easily maintained using the Robert Sorby ProEdge sharpening system.

Robert Sorby Fingernail Spindle Gouge 1/2″ Tool Steel Only

Robert Sorby Fingernail Spindle Gouge 1/2" Tool Steel OnlyThe fingernail shape of this gouge increases flexibility allowing the turner to perform 'pull cuts' without catching the lathe bed. The greater cutting area can be used equally well for heavy profiling cuts or fine, delicate shearing cuts. Easily maintained using the Robert Sorby ProEdge sharpening system.

Robert Sorby Skew Chisel 3/4″ Tool Steel Only

Robert Sorby Skew Chisel 3/4" Tool Steel Only This tool is rectangular in section, giving it more weight and making it superb for spindle work, e.g., newel posts, and table legs. We modified the tool this year by ‘rolling’ the edges slightly to help turners avoid catching an edge and to allow greater maneuverability.

Robert Sorby Bowl Gouge 3/8″ Tool Steel Only

Robert Sorby Bowl Gouge 3/8" Tool Steel Only A must in the tool kit of every bowl turner. These tools are ideal for making bowls. They can produce either massive profiling cuts or delicate finishing cuts as necessary.